APCA Safety Zone - Tools for the Workplace

APCA Safety Committee Meeting

November 8, 2018

Sheraton North Houston at George Bush Intercontinental

Houston, Texas

1. Welcome

Committee Chair Ron Oakley, Sunland Construction, welcomed attendees and said he was happy to see so many people at the meeting. This hotel – the Sheraton North Houston at George Bush Intercontinental – will be our meeting place going forward.

The following representatives from APCA-member companies were in attendance:

Ben Bookman

Rob Booth

Nick Bruno

Mike Castle

Dean Dodson

Dominique Estrello

David Evans

Adam Helleberg

Miles Hester

Larry Horton

Jimmy Lindsey

Laris Nolan

Ron Oakley

Kyle Parko

Rich Prosser

James Roberts

Jose Ruiz

Richard Rybka

Charles Simpson

Clint Wilson

OSHA:

James Shelton

APCA Staff:

Mike Ancell

2. Safety Moments

Oakley reviewed the procedures for an emergency evacuation during the meeting, including nearest exits, a meeting place outside, and who should have to attendee list so we can account for everyone.

During introductions, Laris Nolan, Bluewater Constructors, offered a poignant safety moment from a fatal car wreck he had witnessed a week earlier. He assisted the victim and the first responders and was moved by the experience: "It tore me up." Laris' story underscored the importance of safety efforts, and he urged everyone to "think about what you're doing."

3. APCA Executives' Opening Comments

APCA Board member Nick Bruno, Bi-Con Services, thanked attendees for coming. He knows everyone is busy and appreciates their participation. He said the committee's challenge is to pave a safety path for merit-shop contractors, and he noted the importance of developing and sharing best practices and on-boarding new employees. He encouraged everyone to speak up during committee meetings; participation is how you get value.

APCA President-Elect Mike Castle, Progressive Pipeline, thanked attendees for volunteering their time and for their leadership on safety: "It says something about you and about your company." He echoed Bruno's comments on speaking up and being involved.

4. Introductions

All participants introduced themselves and shared their company name, years in the industry, and something good that had recently happened to them or their family.

5. OSHA Update

OSHA Compliance Assistance Specialist Jim Shelton discussed a variety of safety topics with the group, including the recently issued final crane rule, rate-based incentives, drug testing, a new emphasis on ammonium nitrate, and the agency's big push on trenching & excavation safety (if a compliance officer drives by a jobsite with an open trench, they are required to stop and take a look).

6. OSHA Alliance Meetings

Committee Co-chair Miles Hester, Progressive Pipeline, reported on an OSHA Alliance meeting that he attended in September and on the APCA Mid-Year Meeting in October. The next OSHA Alliance event is April 4, 2019, in Washington, D.C., and an APCA-OSHA Alliance teleconference is scheduled for April 17, 2019.

7. Common New-Hire Orientation for APCA Members

The group discussed the possibility of creating a common new-hire orientation for APCA members. Ron Oakley said he envisioned something that takes less than an hour, explains APCA's safety philosophy, and covers the basics. The group discussed what their companies do (most companies use one day for orientation, though at least one uses four days), the various companies that can handle orientation training (SafeLand USA, Safe Construction Consulting, PEC Safety, Cat), and what owners require (most require their orientation video). Question: is there a need among members? They discussed costs (one company said $2,000/minute of used video) and asked PCCA staff to look into how much a video would cost.

8. Lessons-Learned Repository

The committee discussed creating a repository of safety-related lessons learned on the Safety Zone section of the APCA website, similar to what the INGAA Foundation does on its website. The submissions would be anonymous and reviewed by the Safety Committee (or a smaller subcommittee) before being posted. APCA members would receive an email alert when new lessons learned become available. Question: would APCA members use it? The group discussed the INGAA Foundation effort, how often they use it (not a lot), and whether APCA could piggyback on their efforts (probably not). It was noted that contractors' clients would like it and that people like photos and diagrams, so uploading capability is a must. APCA staff said the website part of the repository could be handled inexpensively.

9. Merit-Shop Safety Message

APCA needs to develop a safety message to "advertise the good work that we do." We need to develop the message and then deliver that message at places like Client Safety Summits. It was noted that the speakers at such summits tend to be mostly from union contractors. The committee reviewed a draft form, created by Miles Hester, for collecting the safety data from members that we would use to craft the safety message. The survey would be annual, and the group discussed the various ways the data could be collected (fax, email, by hand). The data needed could be garnered from OSHA Form 300A, but once the data are online, they are dated. It was noted that the APCA Board would have to approve any survey that goes out. It was suggested to add a questions about the type of work the company performs, training data (count all "safety encounters"), and motor vehicle incident rate. The group discussed Client Safety Summits and how to get invited to present. APCA could provide members with the information they need to present themselves or could send someone to present.

10. MediCamp-type Facilities

Ron Oakley asked the committee if they used companies like Construction MediCamp for temporary mobile medical facilities. When something goes wrong, where do you get help? Only one hand was raised when it was asked how many companies use these services. It was noted that many companies find them cost-prohibitive but use remote medicals for some large projects. Committee members said it is a growing industry, and some use Fishbone Safety Solutions. It was noted that when working out West, medical facilities are few and far between.

11. Guest Speakers for Future Quarterly Meetings

Ron Oakley said that we want to add value to the quarterly safety meetings by bringing in speakers on relevant topics. He said that Jim Shelton will present at all the meetings – "He's not a compliance officer, and he has a lot of knowledge." The group discussed possible topics and offered specific speakers that their companies use. Topics discussed: border patrol, Equal Employment Opportunity Commission (Shelton could arrange), firearm rules and safety (good for companies working in multiple states), active shooter strategy, DOT compliance (former compliance officer Ricky Thigpen was suggested), and accident investigation/root cause.

12. APCA Safety Email

Committee members were encouraged to use This email address is being protected from spambots. You need JavaScript enabled to view it. for communicating with the Safety Committee chairs. The emails go to Ron Oakley, Miles Hester, and Tim Wagner in the APCA office.

13. Best Practices Review and Update Assignment

As most items in the APCA Best Practices Library haven't been updated in several years, the committee will undertake a complete review and update. Committee members will select specific best practices to review, and then the committee will review, discuss, and approve, before sending them to OSHA for approval. These best practices are short and designed to be very general. Committee members will have two weeks to review their sections and were asked to use the "track changes" function in Word so everyone can see the changes being suggested. The goal is to get the suggested changes back by November 30, the revisions to the committee by January 1, and start getting the new best practices to OSHA on January 31. Committee members volunteered for all the best practices (see separate document for assignments). The group discussed new areas for possible best practices and agreed to tackle Jobsite Safety Analysis/Field-Level Hazard Assessment, Pipe Stringing, Fatigued Driving, and Welding & Grinding (in the field and in the shop).

14. 2019 Safety Committee Meeting Dates

The group agreed on the following meeting dates for 2019 (all at the Sheraton North Houston at George Bush Intercontinental in Houston, Texas): Q1 - February 28, Q2 - May 9, Q3 - August 15, and Q4 - November 7.